Oxalic acid pan evaporator 12 volt Alu Varroa mite Varroa treatment with heat protection
Product.Nr.: 130011
Manufacturer: Bienoxal
EUR 61,00
incl. 19 % VAT
-
Sofort versandfähig, ausreichende Stückzahl
- delivery time 7 Tage
- In stock 24 piece
- weight 1 kg
product description
Oxalic Acid Pans Vaporizer
with heat apron
WEEE registration number: DE 54297286
Decoration is not the scope of services
The pan is made of aluminum with a size of 50 x 40 x 10 mm
Total length is approx. 42 cm, with an insertion depth of approx. 27 cm.
The evaporator is heated by a 12 volt car glow plug, 12 volt GK002
Glow plug diameter 6 mm, length 21 mm
Thread 12 x 1.5 mm, wrench size 12 mm
Also note that this can be changed, not like many others.
The 2 x 4 mm² supply line is not just a thin cable that slows down the energy required when it is cold
is about 3.5 meters long and has large battery terminals.
The rod is white galvanized.
The connections are soldered.
Extra large cutout with approx. 33 x 29 x 8mm.
The color of the cables and terminals may vary, depending on availability.
(Sample photo is with heat apron)
Evaporation after approx. 60 seconds
after approx. 120 seconds
(Sample photo is with heat apron)
End after approx. 3 minutes.
Application recommendation is enclosed.
Please note that the time of evaporation depends on the ambient temperature and the battery used, as well as its state of charge.
When using a charger, this should have at least 12 amps.
The glow plug initially draws approx. 7.8 amps at 0 ° C
and after about 40 seconds another 5.5 amps.
All texts, photos and graphic designs used on this website are protected by copyright. If you want to use parts of it, please contact the site operator. If necessary, he will then establish contact with the author or authorized user.
with heat apron
WEEE registration number: DE 54297286
Decoration is not the scope of services
The pan is made of aluminum with a size of 50 x 40 x 10 mm
Total length is approx. 42 cm, with an insertion depth of approx. 27 cm.
The evaporator is heated by a 12 volt car glow plug, 12 volt GK002
Glow plug diameter 6 mm, length 21 mm
Thread 12 x 1.5 mm, wrench size 12 mm
Also note that this can be changed, not like many others.
The 2 x 4 mm² supply line is not just a thin cable that slows down the energy required when it is cold
is about 3.5 meters long and has large battery terminals.
The rod is white galvanized.
The connections are soldered.
Extra large cutout with approx. 33 x 29 x 8mm.
The color of the cables and terminals may vary, depending on availability.
(Sample photo is with heat apron)
Evaporation after approx. 60 seconds
after approx. 120 seconds
(Sample photo is with heat apron)
End after approx. 3 minutes.
Application recommendation is enclosed.
Please note that the time of evaporation depends on the ambient temperature and the battery used, as well as its state of charge.
When using a charger, this should have at least 12 amps.
The glow plug initially draws approx. 7.8 amps at 0 ° C
and after about 40 seconds another 5.5 amps.
All texts, photos and graphic designs used on this website are protected by copyright. If you want to use parts of it, please contact the site operator. If necessary, he will then establish contact with the author or authorized user.
Customers also purchased
Reviews
* Only reviews that were submitted by buyers who bought the product in this shop receive the addition "Verified Purchase". more